FOSCAM PoE Active Injector for POE IP cameras
Product Code: Foscam-POE-Injector-Pse15
Availability: Out Of Stock
The Foscam PSE15 POE Injector is able to supply power to a POE Enabled IP Camera or POE Splitter over the ethernet cable. Use the PSE15 Injector if you want to get power to an IP camera using your existing non-poe switch or router.
Advantages to using POE when installing your IP Security Cameras.
-You don't need a Power Point near the camera location, the power comes over the ethernet cable.
-No wi-fi hassles, plug it in and it just works!
PSE15 POE Injector is compatible with all Foscam IP Cameras
No extra equipment is required for POE ENABLED cameras. Just run the ethernet cable from the injector straight to the camera.
If the camera is not poe enabled then you will require a Foscam PD15 POE Splitter at the end of the cable to power the camera.
The Active PoE Injector allows for POE power when a POE switch is not available. Generating up to 15.4W, the POE Injector supplies remote power for Foscam IP cameras. It can work with 10/100Base-T networking devices and emerging 1000Base-T devices such as Wi-MAX and wireless IEEE 802.11n access points.
-Safe and reliable power to WLAN access points
-Ports arranged in pairs, a data port input corresponds to a POE port output
-Automatic detection and protection of non-standard Ethernet terminals
-All ports support Auto-MDI/MDIX
-Supports 10/100/1000Base-T LAN environments
-Complies with IEEE 802.3af/at standards, Supports POE power up to 15.4W for each POE port
-Compatible with POE compliant PDs and POE Splitters
-Intelligent power management
-LED indicators for monitoring power and POE status
-Plug & Play. No configuration required.
-1x Foscam PoE Injector
-1x NZ plug power cord
-1x user manual
Price incl GST and 1 year NZ Warranty